EasyManua.ls Logo

Tecno T340 - Page 14

Tecno T340
37 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
during charging.
When charging is complete, disconnect the charger from the phone and electric
power.
*Note:
- The battery must be charged with the charger supplied by the manufacturer
in a ventilated place with a temperature between 5 and 40. The use of
unapproved charger may cause danger and will invalidate the warranty.
- Charge the battery when the phone is turned off automatically or displays the
warning of low battery. If the battery has not used up, the charging time will be
shortened.
- The standby time and talk time provided by the manufacturer is calculated in
the ideal environment. The actual time may vary with the network condition,
working condition and running mode.
- Make sure that the battery is well installed and can not be removed during
charging.
- When charging is complete, disconnect the charger from the phone and
electric power.
- If the charger has not been disconnected from the phone and electric power,
charging will start again after a certain amount of battery power is used in a
period of 5~8 hours. This is not advised due to the fact that doing so may have
some adverse impact on the life of the battery.

Related product manuals