To Next PageTo Next Page
Need help?Do you have a question about the Tecnoalarm EXPLORER II and is the answer not in the manual?
Assesses ground surface, environmental factors, and obstacles for optimal barrier placement.
Explains barrier placement for perimeter coverage and preventing interference between TX and RX units.
Details connecting the barrier to a TP12 unit with a TP COM for fault output to a technical zone.
Illustrates connecting the barrier to a TP12 unit and a Tecnotel system.
Describes the visual alignment process using a digital voltmeter to check signal reception.
Details using an oscilloscope to align the barrier by adjusting signal amplitude and time base.
Explains barrier alignment using a Tecnotester device to achieve maximum signal and enable buzzer feedback.
Explains how to test the electronic board's functionality using stand-by input and fault/alarm outputs.
General| Brand | Tecnoalarm |
|---|---|
| Model | EXPLORER II |
| Category | Security Sensors |
| Language | English |
