TECNOEKA EKF 423 - Cooking Operations and Advice; Residual Risks and Control Panel

Electric Ovens rev. 8 ____________________________________ EKF 423 – EKF 423 AL – EKF 423/001 – EKF 423 U
EKF 423 M – EKF 423 M/3/100
_________________________________________________________________________________________ page 7
6. Residual risks (for the user)
After a cooking operation, open the door cautiously, to avoid a violent outflow of heat which
could cause burns.
While the oven is in operation, pay attention to the hot zones (marked on the appliance) of its
external surfaces.
Place the machine on a bench or similar support, at a height of at least 85 cm from the floor.
The bench or support must be able to support the weight of the machine and house it
correctly. The appliance contains electrical parts and must never be washed with a jet of water
or steam. The appliance is electrically connected: before attempting any cleaning operation, cut
power to the appliance.
Do not use the door handle to move the appliance (the glass panel may break).
When the tilting door is wide open, do not use the internal surface to place objects to avoid
damaging permanently the door hinges.
7. How to use the control panel
Fig. 1
Fig. 2
Fig. 3
“End of Cooking”
programming knob
Control thermostat knob
(only for mod. EKF 423/001
T
MAX
= 200°C)
Functions selector knob
- "End of cooking" programmer indicator light
- Control thermostat indicator light
- Humidifier knob (for predisposed models)
Programming cooking time - To run the oven, turn the programmer knob (Fig. 1) in line with
symbol (continuous operation) or in line with the selected cooking time (up to 120 minutes).
In the second case, end of cooking is signalled by the oven switching OFF automatically.
Programming cooking temperature - Turn the knob of the adjustment thermostat (Fig. 2) in line
with the temperature selected for cooking.
Control thermostat indicator light - The control thermostat orange indicator light goes OFF
whenever the programmed temperature is reached inside the cooking compartment. It lights up
again when the thermostat is tripped to re-establish this temperature.
"End of cooking" programmer indicator light - The programmer green indicator light indicate
that the oven is electrically connected to the power supply line and that cooking time is active.
Oven internal light - The light is always on when the oven is operating.