2
MAINTENANCE MANUAL
NOTICE:
This maintenance manual is a full and essential part of the product.
Read the user safety and maintenance notices carefully.
This machine must be used only for the purpose for which it was expressly designed. Any other use must be
considered improper and hence dangerous.
The manufacturer will not be liable for any damage due to improper, wrong or unreasonable use.
Tecnosystem holds itself responsible for the machine in its original configuration.
Any intervention which alters the structure or the working cycle of the machine must be carried out or
authorised by the Technical Office of Tecnosystem.
Tecnosystem does not hold itself liable for the consequences due to use of any non original spare parts.
The Company reserves the right to carry out any technical modifications to this manual and to the machine
without being obliged to give advance notice.
The property of this manual is reserved by the owner – Reproduction forbidden. The Company will safeguard
its rights to the drawings and catalogues according to the law.
Further copies of this manual may be requested from the Tecnosystem After-sales Service.
WARNINGS:
This manual is supplied with the machine and must be kept with the utmost care. Therefore it should be read
carefully in order to become familiar with the safety procedures required for servicing and operating the
machine.
This machine must be used only for the tasks it was designed for. Use of the machine for tasks other than
those specified here in is hazardous.
The Manufacturer shall not be held responsible for damage caused by improper and erroneous usage.
The Manufacturer shall be held responsible only for the machine as it was at the time of delivery.
Any modification to its construction and work-cycle must be performed or authorized by Tecnosystem
Engineering Dept.
The Manufacturer shall not be held responsible for troubles due to the use of non-original spare parts.
The Manufacturer reserves the right to make any modifications to the specifications contained in this manual
without giving prior notice.
This manual and related drawings are property of Tecnosystem, therefore they must not be reproduced in
any form.
Faillure to do so will entitle the Manufacturer to take legal action.
Additional copies of this manual are available from the TECNOSYSTEM’s After Sales Service Dept.
To Next Page
Loading...