EasyManua.ls Logo

Tecnosystemi Blitz 510 DA - Troubleshooting - Core Sections; Electro-Mechanical Faults

Default Icon
43 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
TROUBLESHOOTING:
1 – Possible problems during installation
1.1 – Pump loading manual phase relation.
2 – Possible problems due to failure to provide maintenance
2.1 - Pod holder setting (Only for model 510)
2.2 – Filter cleaning (Only for model 510)
2.3 – Maintenance of the cappuccino maker
3 – Possible problems due to electro-mechanical faults
3.1 - The machine does not turn on.
3.2 - The machine turns on but does not heat.
3.3 - When you press the coffee switch, the pump goes on in a very noisy
way, but no coffee comes out of the pipe.
3.4 - When you press the coffee switch, the pump goes on but no coffee
comes out of its spout and water comes out of the hot water pipe.
3.5 - When you press the water delivery button, the pump goes on, but the
water exits through the by-pass instead of coming out from the relevant pipe,
and goes into the tank (short pipe).
3.6 - When you press the coffee delivery button, the pump goes on but does
not let any coffee out from the relevant pipe.
3.7 - During the steam boiler water level renewal phase, the pump goes on
working for a maximum time of 2 minutes, leading to safety stopping of the
machine.
3.8 - Continuous dripping from the coffee spout when the machine is on,
even when it is not working.
3.9 – When you press the water or coffee switch, the pump is not turned
on.
3.9A - The machine makes the automatic differential switch intervene in
order to protect the power line it is connected to.
3.10 - Steam boiler pressure fault.
3.11 - The steam boiler does not heat.
3.12 - Fault with steam output during working phase.
3.13 - Faulty water output from the safety valve of the boiler during
coffee delivery phase.
3.14 – If steam delivery is requested, the pressure switch shows zero
pressure and the steam delivery stops immediately.
4 - Problems, diagnostics and instructions about the station, the
keyboard and the dosing of the DA model.
4.1 - When turning the machine on, the leds on the keyboard stay off, without
performing the turning on/off sequence.
4.2A - When selecting a coffee (high or low coffee level), a quantity of coffee
different from the preset one is obtained.

Related product manuals