TECO 36 SPECIAL - Page 104

104 User’s manual

-


WARNING
Risk of explosion. During the bead insertion phase, do not exceed the maximum
pressure indicated by the manufacturer
WARNING
Operatetheinationjetsonlyfortyrebeadinsertion.
WARNING
Operatetheairjetsonlyaftermakingsurethattherimiscorrectlyblocked.
WARNING
RISKOFEXPLOSION.Donotmountatyreandarimthatdonothavethesame
diameter (e.g., 16 and 1/2 inch tyre and a 16 inch rim).
           





WARNING
Discharge the air from the pneumatic system before disconnecting the power
supply or other pneumatic components. The air is accumulated in the tank for
operatingthebeadinsertionjets.
B
37