User’s manual 107
EN
11. MAINTENANCE
WARNING
It is prohibited to perform any operation that changes the pre-set value of the pres-
sure regulation valve or pressure limiter. The manufacturer declines all liability for
damage resulting from tampering with such valves.
WARNING
Beforemakinganyadjustmentsorcarryingoutmaintenanceonthemachine,
disconnect the electrical and
compressed air supply and make sure that
all moving parts are locked in place.
WARNING
Do not remove or modify any component of this machine (these operations
may only be carried out by technical assistance personnel).
WARNING
When the machine is disconnected from the pneumatic power supply, the
pneumatic actuators can remain pressurized.
WARNING
Before carrying out any regular maintenance operation or topping up with lubricant,
disconnect the machine from the compressed air supply line.
WARNING
The manufacturer declines all responsibility for claims resulting from the use
of non-original spare parts or accessories.
To Next Page
Loading...
