TECO 36 SPECIAL - TROUBLESHOOTING; Turntable and Motor Issues

User’s manual 105
EN
10. TROUBLESHOOTING
WARNING
The information below and the booklet “spare parts” do not authorise the user
to operate on the machine in case of malfunction. They provide the technical
support centre with accurate information so as to reduce intervention times. Any
interventiononthemachineoronthesystemmustbeperformedbyqualiedand
authorised personnel.
Turntable does not turn
Lack of power supply.
➥
➥Check the state of fuses.
➥
➥
The motor is not running.
➥
➥Check the motor rotation control of the pedal unit
➥
➥Replace the motor.
Belt broken.
➥
Reduction gear clamped:
➥
Turntable does not rotate in either direction
Control faulty.
➥Replace the inverter.
➥
➥
➥
Gear unit noisy. The turntable makes a 1/3 of a turn and
then stops
Reduction gear is seizing.
➥