TECO AEMB User Manual

Teco Installation and Maintenance Manual
TEFC Squirrel Cage Induction Motors
Teco Electric and Machinery Company
Manual Number: IOM ~ TEFC Rev.01
4
Chapter 1: MOTOR DESCRIPTION
This manual applies to Teco model series types as follows:
AEEB, AEVB, AEHB, AEMB, AEUB, AEHD, AEJE, AFJE, AEJU, AEJH and AFJH.
The motors are of Cast Iron Construction, Totally Enclosed Fan Cooled, Squirrel
Cage Induction type designed for operation on a 415/1000/3,300/6,600V/ 3 Phase
50Hz supply system equipped with grease lubricated anti friction type bearings.
SAFETY WARNING
The following instruction address the more common situations
encountered in motor installation, operation and maintenance. For the
TECO warranty to remain valid, the motor must be installed and
operated in strict accordance with the outline drawing, motor nameplate
and these instructions and must not be altered or modified in any
unauthorized manner.
During the installation & operation of motors in heavy industrial
applications there is a danger of live electrical parts and rotating parts.
Therefore to prevent injury and/or damage the basic planning work for
transport, assembly, installation & operation needs to be carried out by
authorized and competent personnel. Points in this manual that are
boxed and headed “DANGER”, “CAUTION” or “NOTE"(see below) should
be observed as they indicate possible danger to personnel and/or the
potential of equipment damage.
This prompt is used when there is an immediate hazard that WILL
result in severe personal injury or death if correct procedures are not
followed.
This prompt is used to warn against potentially unsafe practices that
COULD result in personal injury and/or property damage if correct
procedures are not followed.
This prompt is used when an operation, condition, or information is of
sufficient importance to warrant highlighting

TECO AEMB Specifications

General

Brand	TECO
Model	AEMB
Category	Engine
Language	English