TECO JNEV-202~203-H1 User Manual

Microprocessor Controlled
IGBT Drive
Inverter Motor Speed Regulator
Operating Manual
EV Series 110V 0.2∼0.75KW
(0.2∼1HP)
220V 0.2∼2.2KW
(0.2∼3HP)
440V 0.75∼2.2KW
(1∼3HP)
This manual may be modified when necessary because of improvement of the product, modification,
or changes in specifications, This manual is subject to change without notice.
Distributor
Ver:03 2006.05
10F., No.3-1, Yuancyu St., Nangang District,
Taipei City 115, Taiwan
Tel :+886-2-6615-9111
Fax :+886-2-6615-0933
http://www.teco.com.tw

TECO JNEV-202~203-H1 Specifications

General

Model	JNEV-202~203-H1
Category	Controller
Frequency	50/60Hz
Power Rating	2.2kW
Protection Features	Overcurrent, Overvoltage, Short circuit
Communication Interface	RS-485
Operating Temperature	-10°C to 50°C
Storage Temperature	-20°C to 60°C

Summary

Quick Start Guide

Before starting the inverter

Initial checks before powering up the inverter.

Apply power to the drive.

Steps for applying power and initial observation of the drive.

Check motor rotation without load.

Procedure to verify motor rotation direction and output.

Check full speed at 50Hz/60Hz

Testing the motor operation at full speed.

Vector Mode Settings

Chapter 1 Safety Precautions

Before Power Up

Safety checks before applying power to the inverter.

During Power up

Safety measures during power application.

Before operation

During operation

Safety guidelines while the inverter is running.

Chapter 3 Mounting and installation of the JNEV drive

Mounting and installation

Wiring Rules

Guidelines for proper electrical wiring of the inverter.

Inverter Specification

Chapter 4 Programming instructions & Parameter list

Keypad description

Parameter function list

Comprehensive list of inverter parameters and their settings.

Advanced parameter function list

Parameter function description

Detailed explanation of basic inverter parameters.

Chapter 5 Troubleshooting and maintenance

Trouble indication and corrective action

Guide to identifying and resolving inverter faults and errors.

Set up Configuration, Interface Errors

Keypad operation error description

General functional troubleshooting

General steps for troubleshooting common inverter operational issues.

Troubleshooting Flowcharts 7300EV Series

Flowcharts to diagnose and resolve specific inverter faults.

Appendix EVinverter parameter setting list

Parameter List