OUTDOOR UNIT INSTALLATION
INSTALL DRAINAGE HOSE
The drain hose must install at the bottom of
the outdoor unit before bolting the outdoor
unit in place.
1. Insert the drainage joint to the hole at
the bottom of the outdoor unit.
2. Connect the drainage hose extension
(not included) to the drain joint to
redirect water from the unit during
heating mode.
Drainage joint
Drainage hose
ANCHOR OUTDOOR UNIT
The outdoor unit can be anchored to the
ground or to a wall-mounted bracket. The
wall-mounted bracket must be able to
support at least 4 times of the weight of
the outdoor unit.
UNIT MOUNTING DIMENSIONS
The following is a list of different outdoor
unit sizes and the distance between their
mounting feet.
Outdoor Model
W D
H
W1 W2 W3 D1 D2
Install the unit on the ground or on a concrete mounting platform
1. Accoring to the outdoor unit mounting dimensions to mark the installation position for
expansion bolts.
2. Drill holes and clean the concrete dust and place the expansion bolts.
3. Place the outdoor unit bae on the bolts and the pre-drilled holes.
4. Use wrench to fix the outdoor unit firmly with bolts.
Install the unit on a wall-mounted bracket
1. Mark the position of bracket holes based on the outdoor unit mounting dimensions.
2. Drill holes and clean the concrete dust.
3. Thread expansion bolts throught holes in mounting brackets, put mouing brackets in
position and make sure brackets are level before place bolts into the wall.
4. Carefully life the unit and place the mounting feet on brackets.
5. Use wrench to fix the outdoor unit firmly with bolts to the brackets.
If applicable install rubber blankets on the mounting feet to reduce vibrations and noise.
UNIT MOUNTING DIMENSIONS
28
TSO26H3DVJT
810
305 549 143 433 151 282 278
TSO35H3DVJT
810
305 549 143 433 151 282 278
TSO52H3DVJT
863
349 602 194 433 151 319 314
TSO72H3DVJT
927
380 699
129.5
586 129.5 375 347.5
978 421 803 153 607 148 391 390
TSO88H3DVJT
To Next Page
Loading...
