EasyManua.ls Logo

TECO Platinum 3D Inverter Series - Outdoor Unit Installation

TECO Platinum 3D Inverter Series
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
OUTDOOR UNIT INSTALLATION
Over 200cm/79in.
Over 30cm/12in.
Over 50cm/20in.
Over 30cm/12
in.
Over 50cm/20in.
Before installing the outdoor unit, you must
choose an appropriate location. The
following guidelines will help you choose
the appropriate location for the unit.
Proper installation locations should
meet the following requirements
Meets all spatial requirements shown in
Installation Space Requirements.
Good air circulation and ventilation.
Firm and solid - the location can
support the unit and will not vibrate.
Noise from the unit will not disturb
neighbors.
Protected from prolonged periods of
direct sunlight , rain or exposed to
heavy wind.
DO NOT install unit in the following
locations:
SPECIAL CONSIDERATIONS FOR EXTREME
WEATHER
SELECT INSTALLATION LOCATION
Near any obstacle that will block air
inlets and outlets.
Near a public street, crowded areas, or
where noise from the unit will disturb
others.
Near animals or plants that will be
harmed by hot air discharge.
Near any source of combustible gas.
In a location that is exposed to large
amounts of dust.
In a location exposed to excessive
amounts of salty air.
If the unit is exposed to heavy wind:
Install unit so that air outlet fan is at a 90°
angle to the direction of the wind. If needed
build a barrier in front of the unit to protect
it from extremely heavy winds.
Strong windStrong wind
WWind Baffleind Baffle
Strong windStrong wind
Strong windStrong wind
27

Related product manuals