TECO Platinum 3D Inverter Series - Page 8

REMOTE CONTROL & FUNCTIONS
No.
Button
Function
To select the mode of operation (AUTO, COOL, DRY, FAN, HEAT).
To activate/deactivate the TURBO function.
To decrease temperature, or Timer setting hours.
To increase temperature, or Timer setting hours.
To turn on/off the air conditioner .
To select the fan speed of auto/mute/low/low-mid/mid/mid-high/high/turbo.
8
11
6
7
9
MODE
TURBO
1
2
3
4
FAN
5
To activate/deactivate the ECO function.
ECO
To set the time for timer on/off.
TIMER
To switch-on/off the function SLEEP.
SLEEP
10
To switch-on/off the LED display.
DISPLAY
12
13
To switch-on/off the I FEEL function.
I FEEL
14
To switch-on/off the MUTE function.
MUTE
Long press to activate/deactivate the GEN function (depending on models).
15
16
To activate/deactivate the CHILD-LOCK function.
MODE + TIMER
17
To activate/deactivate the SELF-CLEAN function (depending on models).
18
To activate/deactivate the GENTLE WIND function (depending on models).
FAN + MUTE
19
To activate/deactivate the HEALTH function (depending on models).
HEALTH
CLEAN
Long press to activate/deactivate the 8
o
C heating function (Not avail).
To activate/deactivate the ANTI-MILDEW function.
ANTI-MILDEW
or
GENTLE WIND
To stop or start horizontal flaps louver movement or set the desired up/down air flow direction.
To stop or start vertical deflectors louver movement or set the desired left/right air flow direction.
NOTE:
• The display and some functions of the remote control may vary according to the
model.
• The shape and position of buttons and indicators may vary according to the
model, but their function is the same.
• The unit confirms the correct reception of each button with the beep.
6