Receiving and Inspection
Included Parts List
1
Inspect the chiller closely upon receipt.
Record any indication of damage and contact seller immediately.
2
Save the box and packing materials
If your chiller ever needs to be repaired or serviced, you will need to ship it in the original box.
3
Record your Model and Serial Number for easy reference
There is a space on the first page of this manual to record this information. You may be asked
for the serial number when calling for support.
In / Out Plugs
Located in the in/out ports of the
chiller (2) Attached to chiller
Shutoff Valve
(2)
Elbow
chiller (2) Attached to chiller
Ring Nut
Attached to chiller (2)
WARNING:
When the chillers are inverted during maintenance or shipping, you must let the unit
sit for at least 30 minutes upright to allow the coolant to settle: failure to do this before
O Ring
Attached to chiller (2)
Ring Nut
turning on the chiller may result in damage to the compressor.
Serial and Model Number Location
Housing Ring Nut
Attached to chiller (2)
Housing Gasket
Attached to chiller (2)
Located in the in/out ports of the
chiller (2) Attached to chiller
Located in the in/out ports of the
chiller (2) Attached to chiller
Power Cord
TR30/60 - Power Cord is attached to chiller
Fuse
1 installed, 1 spare
Air Filters
1 installed, washable
/
reusable
Bottom
Front , Underneath the Air Filter
Air filter must be removed to
access the serial and model number
Back
Note: Color and appearance of actual parts may vary slightly
To Next Page
Loading...
