TECO seachill tr5 - Installation and Assembly

P age 10
P age 11
Optional Parts Installation and Assembly
Flow Indicator
400 W Heater Kit - TR5 Only
15 W UV Sterilizer Kit
Teco SeaChill Chillers are intended for indoor operation. Do not expose chiller to outside elements or direct
sources of heat. Maximum allowed ambient temperature is 95°F/35°C. Do not operate chiller in temperatures
over 95°F/35°C.
If the chiller is placed in an enclosed space (a cabinet or aquarium stand) it must have an air inlet as well as
a ventilation outlet. The air inlet should be at least the same size and dimensions as the air outlet and can be
placed to face the sides or front of the chiller.
Chiller must have a space of at least 8 in/20 cm between the ventilation grate and the wall for proper ventilation
to take place. If the chiller is inside of an enclosed aquarium stand the chiller will need to be 8 in/20cm from the
walls of the stand. If ventilation grate or fans must be placed closer than 8 in/20 cm to the wall, it is necessary
to create a ventilation outlet the same size and shape as the chiller ventilation grate or fans in the wall.
Required Parts and Tools (not Included)
Flexible Tubing
Pump with the recommended flow rate (see flow-rate specs on page 5)
Teflon Plumbers Tape (for PVC plumbing) or pipe thread sealant with Teflon
Tools you may need:
(for maintenance) Tongue & Groove Pliers, flat-head screwdriver, Phillips-head screwdriver, pliers
15 W Replacement UV Lamp
400 W Heat er Kit
ALL MODEL S
W ARNING:
T he S e a C h ill w ill p r od u c e e x c e ss i ve he a t a n d n o t wo r k p r op e r l y i f n o t p l a c e d i n a
w e ll ven t il a t e d a r e a . C omp r e ss o r dama g e may o cc o u r .
W ARNING:
Bef or e cutting a v entilation hole or gr at e in an aquarium stand, c ontact the stand
manufacturer t o insur e that you will not c ompromise the structural int egrity of the stand.