TECO TWW22HFWDG - Combined Button Operations

Remote Control
General Opera on Guide
(Not applicable to TWW16CFDG)
Note:
● Range of time setting is: 0.5~24h
● The interval between two motions can't exceed 5s, otherwise the remote controller
will exit setting status.
Combined Bu on Func ons
Child Lock Func on
Press “+” and “-” buttons simultaneously to turn on or turn off child lock function.
When child lock function is active, the LOCK indicator will be displayed on the
remote. No signal will be sent from the remote while it is in Child Lock.
Switching between ce rade and
While the air conditioner is off, press both “MODE” and “-” buttons
simultaneously to switch between °C and °F.
Ge ng Started
1. Connect the power to the air conditioner. Press the ON/OFF button on the
remote controller to turn on the unit.
2
. Press the MODE button to select between AUTO, COOL, DRY, FAN or
HEAT.
3
. Press + or - buttons to set the required temperature.
The temperature can ot be set under AUTO mode.
4
. Press FAN button to set from the following fan speeds
Auto, Low, Medium and High.
15
n