Tecomat TC600 Series - The Building

Tecomat TC600
TXV 138 08.02 6
2.5 The Building
The smallest fully functional PLC unit of the TC600 series is formed by
the basic module (BM). It is produced in six designs which differ in the num-
ber and type of inputs and outputs.
Type Order Number
1)
Note
Binary
inputs
Analog
inputs
Transist.
outputs
Relay
outputs
TC601 TXN 061 51 12 - 8 -
TC602 TXN 061 52 20 - 16 -
TC603 TXN 061 53._ _ 12 - 4 4
TC604 TXN 061 54._ _ 16 - - 10
TC605 TXN 061 55._ _ 12 4 - 8
TC606 TXN 061 56._ _ 16 4 4 10
TC607 TXN 061 57._ _ 20 - 20 -
1)
In types TC603 to TC607, the after-number (two digits after the dot)
determine the special BM function:
.00 common function of binary inputs (after-number need not be given)
.01 4 interruption binary inputs
.03 measuring by incremental position scanner
.05 counter of type 3 (unidirectional 16 bit counter with pre-selection)
.06 period and phase shift measurement
Optional part of all BM types are interfaces of two serial communications
channels (CH1, CH2) fitted in the standard design, additional data memory
(DataBox), and a third serial communication channel (CH3) or analog out-
puts.
Type Order number Note
MR-02 5XK 068 91 Interface RS-232 without galvanic separation
from internal control circuits
MR-04 5XK 068 93 Interface RS-485 without galvanic separation
from internal control circuits
MR-09 TXK 085 03 Interface RS-485 with galvanic separation from
internal control circuits
MR-17 TXK 085 11 Interface RS-422 without galvanic separation
from internal control circuits
IM-70 TXK 080 10.00 DataBox, additional data memory 128 kB
1)
IM-70 TXK 080 10.02 DataBox, additional data memory 512 kB
1)
MR-14 TXK 085 08.02 CH3 with interface RS-485 without galvanic
separation from internal control circuits
2)
MR-15 TXK 085 09.02 CH3 with RS-232 without galvanic separation
from internal control circuits
2)
OT-13 TXK 082 60 4 analog outputs without galvanic separation
from internal control circuits
2)
OT-14 TXK 082 61 8 analog outputs without galvanic separation
from internal control circuits
2)
1)
DataBox is added in the production plant exclusively
2)
Only 1 piggyback MR-xx or 1 piggyback OT-xx may be fitted
Number of binary and analog inputs and binary outputs of the BM can be
extended by connecting one extension module (EM), two half extension mo-
dules (EM/2) or by combination of EM, EM/2.
Order numbers for
BM PLC of the TC600
series
Order numbers of
optional BM
piggybacks