Tecomat TC600 Series - Operational Conditions; Basic Parameters

Technical equipment of TC600 PLC
9 TXV 138 08.02
3.2 Operational Conditions
Class of environment effect  33 2000-3
(mod IEC 364-3:1993)
Range of operational tempera-
tures
0 °C to +55 °C
Average temperature during 24
hours
max. +50 °C
Allowed transportation tem-
perature
-25 °C to +70 °C
Relative air humidity 50 % to 95 % without condensation
Degree of pollution 
(idt EN 61131-2:1992, IEC 1131-2:1992)
Overvoltage category of in-
stallation
 33 0420
(eqv IEC 664:1980, IEC 664A:1981)
Immunity against disturbances 
(idt EN 61131-2:1992, IEC 1131-2:1992)
(tab. 16)
Emitted disturbance levels for group 1, class A
 
(mod CISPR 11:1997)
Vibrations Fc 10 Hz to 150 Hz, 0.15 mm, 10 cycles
 !
(idt EN 60068-2-6:1995,
IEC 68-2-6:1995+Corr.1995)
Operating position vertical
Type of operation permanent
3.3 Basic Parameters
BM EM EM/2
Type of appliance to be built-in
Class of el. object  
(mod IEC 536-1:1976, IEC 536-2:1992)
Coverage IP-10B
Supply voltage
(SELV)
24 V~ ±20 %,
50-60 Hz ±5 %
or 24 V- ±20 %
Power input max. 20 VA
or 13 W
1)
Mass about 0.8 kg about 0.4 kg about 0.2 kg
Size (h x w x d)
2)
141x182x69 141x157x44 141x89x44
1)
Power input of BM extended by one EM and one EM/2
2)
See figs. 9.1, 9.2, 9.3