TECORP ELECTRONIC HC2-E1000 Series - 2-3 Product Specifications

- 9 -
2-3 Product Specifications
Items Description
Input
Rated Voltage,
Frequency
Single/Three-phase 220V- 50/60Hz
Three-phase 380V-50/60Hz
Allowable Voltage 170~240V, 330~440V
Output
Allowable Voltage 170~240V, 330~440V
Frequency 0.10~400.0Hz
Control Mode V/F control
Display
Five-digit LED display, Indicator display;
Display setup frequency, Output frequency,
Output current, DC voltage, Module
temperature, Running state, and fault
Control Function
Frequency Setup
Digital setting: 0.01 Hz. Analog setup: 0.1%
of maximum output frequency
Frequency
Accuracy
0.1Hz
V/F Control Changeable V/F curve by setting
Torque Control
Auto raising torque by loading condition;
Manual increase: enable to set 0 to 20 % of
raising torque
Input Terminal
4 multi-function input, take 15 speed control,
process, 2 sets of acceleration/deceleration
Output Terminal 1 set of alarm
Time Setup 0~999.9s for speed up / down
Other Function
Analog input 0~10V, 8 steps of multi-speed,
auto stable voltage
Environment
Temperature -10℃ to 40℃ (non-freezing)
Humidity Max. 95% (non-condensing)
Altitude Under 1000m
Vibration Max. 0.5G
Structure
Cooling Mode Compulsory cooling
Protection Level IP 20