TROUBLESHOOT
NO DISPLAY
1. REINSERT THE BATTERY AND DOUBLE CHECK THE POLARITY (+/-)
2. CLEAN THE BATTERY CONTACTS
3. MAKE SURE THE BATTERY IS NOT DRAINED
4. PRESS THE POWER BUTTON FIRMLY
5. TRY ANOTHER BATTERY
FADING DISPLAY
1. BE SURE THE RANGEFINDER AND ITS CASE ARE COMPLETELY DRY
2. PLACE IT UNDER DIRECT SUNLIGHT FOR 3-4 HOURS
CANNOT MEASURE
1. BE SURE THE DEVICE IS POWERED (NOTHING BLOCKING LENSES)
2. MAKE SURE YOU ARE NOT MEASURING BEYOND MAXIMUM DISTANCE
3. THE TARGET MUST BE FURTHER AWAY THAN 15 METERS/16 YARDS
4. PRESS THE POWER BUTTON BRIEFLY IN NORMAL MODE
DOES NOT MEASURE SLOPE
1. AIM CROSS-HAIRS AT THE POINT YOU WISH TO MEASURE SLOPE
2. THE CROSS HAIRS SHOULD BE LEVEL WITH THE GROUND
D
To Next Page
Loading...
