What does it mean when the red indicator light for the compressor flashes on my Tectro Air Conditioner?
If the red indicator light for the compressor is flashing and the indoor fan isn't working, your Tectro unit has likely switched to defrost mode from heating mode. Wait for the light to turn off within 10 minutes; the unit should then return to heating mode.
How to fix a Tectro TS 832 that doesn't work?
If your Tectro Air Conditioner isn't working, here are a few things to check: * Make sure the plug is correctly inserted into the socket. * Replace the batteries in the remote control. * Check the safety switch and replace any blown fuses. * Ensure that the air inlets and outlets are not blocked.
Why is my Tectro TS 832 blowing no cooled or heated air?
If your Tectro Air Conditioner is not producing cooled or heated air, consider the following: * Verify that the temperature is set correctly. * Check if the air filter is clogged and clean or replace it.
What to do if my Tectro Air Conditioner has no effective control?
If your Tectro Air Conditioner isn't responding to controls, it might be due to a malfunction. Unplug the unit from the socket and plug it back in after 2-3 seconds. This may reset the system.
Why Tectro Air Conditioner do not start the unit immediately?
If you've just changed modes on your Tectro Air Conditioner, there's a 3-minute delay before it starts. Please wait for 3 minutes before attempting to start the unit.
Why does my Tectro Air Conditioner make a sound of running water?
The sound of running water in your Tectro Air Conditioner is usually the refrigerant. This is normal, and no action is required. It can also be the sound of defrosting in the heating mode, which is also normal.
Why does my Tectro TS 832 Air Conditioner make a cracking sound?
A cracking sound from your Tectro Air Conditioner is likely due to the expansion and contraction of the front panel caused by temperature changes. This is normal.
Why is there a lot of vapour/mist coming out of my Tectro TS 832 Air Conditioner?
If you notice a lot of vapor or mist coming from your Tectro Air Conditioner's air outlet, it's likely due to the air temperature in the room dropping significantly while in COOLING or DRY mode. This is normal operation under these conditions.
Instructions for setting the remote control functions like cooling or heating.
Explains the indicators and display on the remote control and unit.
Details the functions, buttons, and usage of the remote control for operating the unit.
Explains how the FEEL mode automatically selects operation based on room temperature.
Details operation for cooling, heating, and fan-only modes.
Explains the operation and temperature settings for dehumidifying.
Describes how to set and use the timer function for automatic operation.
How to activate and use the swing function for air distribution.
Explains how the unit adjusts temperature and turns off automatically in sleep mode.
Step-by-step guide for cleaning the front panel of the indoor unit.
Instructions on how to remove, clean, and reinsert the air filter.
Instructions for setting the remote control functions like cooling or heating.
Explains the indicators and display on the remote control and unit.
Details the functions, buttons, and usage of the remote control for operating the unit.
Explains how the FEEL mode automatically selects operation based on room temperature.
Details operation for cooling, heating, and fan-only modes.
Explains the operation and temperature settings for dehumidifying.
Describes how to set and use the timer function for automatic operation.
How to activate and use the swing function for air distribution.
Explains how the unit adjusts temperature and turns off automatically in sleep mode.
Step-by-step guide for cleaning the front panel of the indoor unit.
Instructions on how to remove, clean, and reinsert the air filter.
General| Brand | Tectro |
|---|---|
| Model | TS 832 |
| Category | Air Conditioner |
| Language | English |
To Next Page
