To Next PageTo Next Page
Need help?Do you have a question about the Tectro TS133 and is the answer not in the manual?
Details required for prompt and correct ordering of spare parts.
Important safety rules and warnings to be observed before and during installation.
Guidelines for selecting the location and mounting the indoor air conditioning unit.
Guidelines for selecting the location and mounting the outdoor air conditioning unit.
Covers support structure, local legislation, and accessibility for the air conditioner.
Step-by-step guide to fitting the installation plate for the indoor unit.
Instructions for drilling wall holes and preparing connective piping and drainage.
Steps for passing piping and securely mounting the indoor unit onto the installation plate.
Key precautions to follow when installing the outdoor unit to ensure safety and performance.
Instructions for anchoring the outdoor unit and installing the drain joint.
Detailed instructions for aligning and tightening refrigerant pipes.
Essential electrical safety regulations for initial installation and operation.
Instructions for connecting the power cable to the indoor unit.
Instructions for connecting the power cable to the outdoor unit.
Steps to prepare the system for air purging using a vacuum pump.
Precautions and guidelines for safely handling packed valves during installation.
Procedure for using a vacuum pump to evacuate the refrigerant system.
Performing essential electrical checks after installation, including resistance and leakage.
Methods for checking refrigerant piping for leaks using soap water or a detector.
Steps for performing a final test run to ensure proper operation and functionality.
Details required for prompt and correct ordering of spare parts.
Important safety rules and warnings to be observed before and during installation.
Guidelines for selecting the location and mounting the indoor air conditioning unit.
Guidelines for selecting the location and mounting the outdoor air conditioning unit.
Covers support structure, local legislation, and accessibility for the air conditioner.
Step-by-step guide to fitting the installation plate for the indoor unit.
Instructions for drilling wall holes and preparing connective piping and drainage.
Steps for passing piping and securely mounting the indoor unit onto the installation plate.
Key precautions to follow when installing the outdoor unit to ensure safety and performance.
Instructions for anchoring the outdoor unit and installing the drain joint.
Detailed instructions for aligning and tightening refrigerant pipes.
Essential electrical safety regulations for initial installation and operation.
Instructions for connecting the power cable to the indoor unit.
Instructions for connecting the power cable to the outdoor unit.
Steps to prepare the system for air purging using a vacuum pump.
Precautions and guidelines for safely handling packed valves during installation.
Procedure for using a vacuum pump to evacuate the refrigerant system.
Performing essential electrical checks after installation, including resistance and leakage.
Methods for checking refrigerant piping for leaks using soap water or a detector.
Steps for performing a final test run to ensure proper operation and functionality.
General| Brand | Tectro |
|---|---|
| Model | TS133 |
| Category | Air Conditioner |
| Language | English |
