To Next PageTo Next Page
Need help?Do you have a question about the Tecumseh OV691EA and is the answer not in the manual?
Defines safety symbols (Warning, Caution, Note) and their significance for safe operation.
Information on emissions compliance for engines certified to meet EPA and California regulations.
Provides contact details for service, repairs, and warranty information.
Hazards of carbon monoxide from engine exhaust and precautions to prevent poisoning.
Precautions to avoid injury or death from flammable gasoline vapors and fires.
Recommendations for adult supervision of engine operation, refueling, and maintenance.
Warnings about the dangers of rotating engine parts and the need for proper guarding.
Warning against modifying the engine, especially the governor setting, to prevent unsafe speeds.
Precautions to avoid burns from hot engine parts and prevent fires by keeping flammable materials away.
Steps to prevent accidental starting when working on equipment, including spark plug disconnection.
Importance of wearing hearing protection due to engine noise causing potential hearing damage.
Locating and understanding the engine identification decal for model, specification, and emissions information.
Information on obtaining and using the Technician's Handbook for advanced engine repair and service.
Guidelines for selecting and using clean, high-quality detergent oil for the engine.
Information on using unleaded regular, premium, or reformulated automotive fuel, and fuel components.
Procedure for checking the engine oil level using the dipstick before operation.
Step-by-step instructions for filling the engine oil sump to the correct level.
Safety precautions and procedure for filling the engine fuel tank with gasoline.
Instructions for starting the engine using a combined speed and choke control lever.
Procedure for starting the engine using separate speed and choke control levers.
Instructions for safely stopping the engine according to equipment manufacturer recommendations.
Guidelines for preparing the engine for short-term storage, including safety warnings.
Procedure for changing the engine oil, including initial and periodic oil changes.
Instructions for removing grass clippings, dirt, and debris from engine components for cooling and safety.
Checking, cleaning, and replacing spark plugs for optimal engine performance.
Instructions for cleaning and replacing air cleaner components to prevent engine wear.
Cleaning instructions for the foam pre-filter of the air cleaner assembly.
Instructions for replacing the paper air filter element.
Information on carburetor adjustment and altitude performance.
Warning against modifying engine speed governor settings to prevent unsafe speeds.
Guidance on factory settings for engine adjustments and contacting dealers for necessary changes.
Step-by-step instructions for removing and installing a new fuel filter.
Safety warnings and procedures for transporting the engine, especially with fuel in the tank.
Procedures for cleaning the engine and preparing it for short-term or seasonal storage.
Guidelines for safe fuel storage and treatment with stabilizer for preventing gum deposits.
Instructions for safely draining fuel from the tank and carburetor for extended storage.
Procedure for lubricating the cylinder bore with oil to prevent corrosion during storage.
Reminder to change engine oil if it hasn't been done within the last 3 months.
Referencing equipment manufacturer's instructions for proper battery storage.
Information on local laws requiring spark arresters and their maintenance for fire prevention.
Table outlining recommended maintenance procedures and intervals for engine longevity.
Details on limited warranty coverage for new engines and electronic ignition modules.
Explanation of the Emission Control System (ECS) Warranty for California engines.
General