10
Wiring Layout
Determine the best cable routing to the sprayer control components on the
sprayer. This could be along the flow line, main frame of the sprayer, or wherever
the cables can be conveniently secured. Avoid any situation where the cables
may lay in puddles, or come in contact with extreme heat sources.
Warning: System Components should be mounted at least 3 feet (1 meter)
from areas of excessive vibration (i.e. engines) to avoid high
frequency interference.
1
CONNECT
STEP
SPEED CABLE
PRESSURE CABLE
POWER CABLE
FLOW METER CABLE
REGULATING VALVE CABLE
VALVE LEADS
To Next Page
Loading...
