Teemi TMCT-07 User Manual

Appearance
Introduction of Key Function
Note: Long press Scan button 3 seconds will turn on the TMCT-07 scanner.
Long press Scan button 3 seconds will turn off the TMCT-07 scanner.
Flip the Scan button can read the barcodes.
Specifications
PHYSICAL CHARACTERISTICS

Teemi TMCT-07 Specifications

General

Brand	Teemi
Model	TMCT-07
Category	Barcode Reader
Language	English

Summary

Scanner Appearance

Introduction of Key Function

Explains how to operate the scanner's primary functions like powering on and scanning.

Restore Factory Defaults

Steps of Programming the scanner

CODABAR

CODE 25 –INDUSTRIAL25

CODE 25 –INTERLEAVED 25

CODE 25 –MATRIX 25

CODE 25-STANDARD 25

Code 39 Configuration

Enable/Disable Code 39

Controls the activation status of the Code 39 symbology.

Code 39 Checksum Verification

Configures how the scanner verifies checksums for Code 39 barcodes.

STANDARD/FULL ASCII CODE 39

CODE 93

Code 128

EAN-8 Configuration

Enable/Disable EAN-8

Controls the activation status of the EAN-8 symbology.

UPC-A Output '0'

UPC-A Checksum Transmission

MSI Configuration

CODE 11

Suffix Code of Barcode Settings

CAPS ON And LOCK

Manual Mode

Automatic scanning Mode

STEPS TO SET UP PREFIX AND SUFFIX