1
4
Control Panel
Removing the control module
■ Remove the timer.*
■ Turn the lid upside down.
■ Unscrew the retaining nut of the module, using a
coin if necessary, while holding the module with
your other hand.
To secure the control module on the lid
■ Position the module on the lid, taking care not to
press the release button and aligning the module
with the holes in the lid.
■ Turn them over while holding the module onto
the lid and tighten the retaining nut, using a coin if
necessary.
■■ The control module will only fit on one way.
Steam release outlet
Pressure indicator
Timer*
Steam release outlet
Programme selector
Operating valve seal
Operating valve
Pressure indicator
Control module
fixing screw
Safety valve
■ The control module has been designed to make the cleaning of your pressure cooker
easier.
■ Once the lid seal and the timer* have been removed, the pot and the lid can go in the
dishwasher.
■ The control module contains all the devices, which allows your pressure cooker to
work. As soon as it is secured onto the lid. You can use your pressure cooker normally.
* depending on model
To Next Page
Loading...
