24 25
If any of the safety systems
are activated:
•
unplug the Cook4me touch,
• allow the Cook4me touch
to cool completely,
•
open the Cook4me touch,
• check and clean:
- the safety valve,
- the ball,
- the covering.
If your Cook4me touch is still leaking
or not working, take it to an Approved
Service Centre.
Regulating the Cook4me touch:
When pressure cooking,
the Cook4me touch can
emit small amounts
of steam. This serves to
automatically
regulate the pressure.
The Cook4me touch lid:
The metal lid
should only be used
with the Cook4me touch.
The metal lid should not
be used with other equipment.
The Cook4me touch lid
is easy to recognise
thanks to the red
safety valve.
Troubleshooting
You may encounter various problems when using the Cook4me touch.
The lid does not close:
•
There may be something stuck
between the bowl and the hot plate.
Remove the bowl to check
that all parts are clean:
- the heating plate,
- the central element,
- under the bowl.
Also check
that the central element
can move around.
•
The lid release handle
is not in the correct position.
Ensure that the release handle
is fully open.
•
The metal lid is not installed
correctly.
Ensure that all elements
of the metal lid
are in the correct position.
•
The bowl damaged
after being hit or dropped.
The bowl should be replaced
at an Approved Service Centre.
An Approved Service Centre
is a repair centre
that has been approved by Tefal.
25
To Next Page
Loading...
Need help?
General
