28 29
The lid won't open
when steam is released:
•
The locking rod
is still in the upwards position.
Check that all of the steam
has been released
and wait until the Cook4me
touch
has cooled down fully.
The light
on the lid handle
no longer lights up:
•
The light is not working.
Take the device
to an Approved Service Centre.
The screen does not light up:
•
The Cook4me touch is not plugged
in.
Ensure that the Cook4me touch
is plugged in
correctly.
•
The Cook4me touch is on standby.
Press the dot on the screen.
The inner metal lid cannot
be removed:
•
The ball lid is positioned incorrectly:
Unscrew the nut on the lid,
remove the inner part of the lid
by pulling it towards you,
access the ball cover,
correctly reposition the
lid.
• error 1 error communicating
with the keypad.
• error 2 error communicating
with the Wi-Fi.
•
error 3 error communicating
with the power board.
•
If the temperature sensor
fails,
the numbers 04, 05, 06, 07, 08,
09 are displayed on the Cook4me
touch.
• error 10 heating error.
•
error 11 pressure problem.
Unplug the Cook4me touch.
Ensure that all elements
of your Cook4me touch
are in good condition.
If needed, clean the elements
of your Cook4me touch
following the cleaning
instructions.
Ensure that the valve cover
is correctly in place.
• error 13 excess pressure.
•
error 14 low pressure
due to lack of water:
- add water to the bowl,
- resume cooking.
Cook4me touch error codes
There are several error codes:
To Next Page
Loading...
Need help?
General
