18
Descaling the steam chamber
(once per month)
• Allow your iron to heat up with a full water tank while on its heel
rest and with the temperature control set to maximum.
• Once the indicator light switches off, unplug the iron and place it
over a sink.
• Remove the anti-limescale collector.
• Shake the iron gently in a horizontal position above the sink until
some of the water (containing the impurities) leaks from the
soleplate.
• To finish the process, replace the anti-limescale collector, pushing
it until you hear a click.
• Plug in your iron for 2 minutes on the heel rest to dry the soleplate.
To Next Page
Loading...
