8
or if it functions abnormally in any way. Do not
attempt to dismantle your appliance: have it
examined at an Approved Service Centre to
avoid any danger.
• Do not allow the power cord to rest close to or
come into contact with sources of heat or sharp
edges.
• Check the electrical power cord for signs of wear
or damage prior to use. If the electrical power
cord is damaged, it must be replaced at an
Approved Service Centre to avoid any danger.
• For your safety, this appliance conforms to all applicable regulations
(Low Voltage Directive, Electromagnetic Compatibility, Environment,
etc).
• Your steam iron is an electrical appliance: it must be used under
normal conditions of use. It is designed for domestic use only.
• Always plug your steam iron:
- into a mains circuit with voltage between 220 V and 240 V,
- into an earthed electrical socket.
Connecting to the wrong voltage may cause irreparable damage to
the appliance and will invalidate your guarantee. If you are using a
mains extension lead, ensure that it is correctly rated (16A) with an
earth, and is fully extended.
• Completely unwind the power cord before plugging into an earthed
socket.
• The soleplate of your iron can reach extremely high temperatures,
and can cause burns: do not touch them. Never touch the electrical
power cords with the soleplate of the iron.
• Your appliance emits steam, which can cause burns. Always handle
the iron with care, especially when ironing vertically. Never direct the
To Next Page
Loading...
Need help?
General
