TEFAL Extra Crisp - Appliance Description and Modes; Component Identification; Automatic Cooking Functions; Getting Started and Operation

5
EN
DESCRIPTION
A Handles
B Digital touchscreen panel
C Time/temperature display
D Air outlet
E Cord
F Grid
AUTOMATIC COOKING MODES
1. Roast
2. Grill
3. Air fry
4. Bake
PRECAUTIONS FOR USE
1. This appliance can only be used on Cook4me products, on the Cook4me bowl, positioned
in the Cook4me.
2. Never use the appliance on other recipients (plastic, glass, etc.)
3. Check the stability of the appliance above the Cook4me bowl, before starting the cooking
cycle.
4. WARNING! To avoid any risk of burns, carry the appliance flat while holding the handles.
5. WARNING! The Cook4me must not be in operation when using the appliance Extra crisp.
6. A the end of the cooking with Extra Crisp, be sure to remove the appliance before starting
a new cooking with Cook4me.
BEFORE FIRST USE
1. Remove all packaging material.
2. Remove any stickers or labels from the appliance.
3. Thoroughly clean the bowl and the removable grid with hot water, some washing-up liquid
and a non-abrasive sponge.
4. Wipe the inside and outside of the appliance with a damp cloth.
PREPARING FOR USE
1. Place Cook4me on a flat and stable work surface.
2. Never use Extra Crisp lid on your Cook4me without the cooking bowl. Wipe the bottom of
the cooking bowl. Make sure that there is no food or liquid residue under the bowl or on the
heating plate. Then place the bowl by positioning the handles of the bowl in the notches.
3. Place Extra Crisp on the Cook4me bowl by aligning the handles of both appliances. Do
not place anything on the appliance. The lid of your Cook4me must remain open when
using Extra Crisp.
4. Check the positioning of the cord: it must not be caught under Extra Crisp, nor between Extra
Crisp and the open lid of the Cook4me. The appliance will not start.