TEFAL FV8066 - Descaling the Steam Chamber (3 Times a Year); Cleaning the Soleplate

14
15
• Allow your iron to heat up with a full water tank while
on its heel rest and with the thermostat control set to
••• setting (Linen / Cotton /Wool).
• Once the indicator light turns off, unplug the iron and
place it over a sink.
• Remove the anti-calc valve.
• Shake the iron gently in a horizontal position over
the sink until some of the water (containing the
impurities) leaks from the soleplate. You may push
the turbo steam trigger to help flush out the minerals.
• To finish the process, replace the anti-calc valve,
pushing it until you hear a click.
Descaling the steam chamber (3 times a year)
Max.
Click
Cleaning the soleplate
• Unplug your iron and, once cooled, wipe it with
a soft cloth.
• Never use chemical or abrasive products.
• Unplug your iron and, once cooled, wipe it with a soft
cloth.
• Never use chemical or abrasive products.
During the next use, turn on your iron in a horizontal
position without putting it into contact with your
laundry in order to eliminate any water containing
mineral residues that remain in the soleplate.
NO
NO
2
min.
• Plug in your iron for 2 minutes on the heel rest to dry
the soleplate.
Click
• Insert the valve in place, pushing it until you hear a
click.
Beware!
Never touch the end of the valve.
The iron will not function without the anti-calc valve.