TEFAL IH2018 User Guide

12
F 1 F2 F 3 F4 F5 F6
130°C 140°C 160°C 180°C 200°C 220°C
• You can use the timer function for this mode (see chapter
“Timer function”). If you use this function, the cooker will stop
automatically at the end of the programmed cooking time.
• If you want to turn off the cooker you need to do so
manually by pressing any button or on/off button.
Deep Fry mode
• This mode is intended for heating an oil quantity of more
than one litre (2L max.)
• When you press fry mode, the light above the button is
switched on and a beep sounds confirmation.
• The power of default setting is level 5 and LCD shows “F5”.
• If you want to change setting, you have to press + or -
button, after each press the hob sounds confirmation.
• When the oil and pan temperature reaches the fry
temperature setting, the hob beeps 2 times.
• For information : you will find below the approximate
temperatures for 2L of oil (Ingenio cookware).
F1 F2 F3 F4 F5 F6
125°C 140°C 155°C 170°C 185°C 200°C
• You can use the timer function for this mode (see chapter
“Timer function”). If you use this function, the cooker will stop
automatically at the end of the programmed cooking time.
• If you want to turn off the cooker you need to do so
manually by pressing any button or on/off button.
Boil mode
This mode allows you to boil between 0.4 litres and 2,5 litres of water
in a saucepan.
(Do not use this mode for milk, as it may burn).
If the quantity of water is insucient, the hotplate will not be able to
detect the boiling point and the boiling point may be reached before
the end of the programme.

TEFAL IH2018 Specifications

General

Brand	TEFAL
Model	IH2018
Category	Cookers
Language	English