TEFAL IH2018 User Guide

16
ERROR CODES
• No-pot or unsuitable pot material protection:
if the pot base diameter is less than 12 cm or if the pot material is unsuitable,
the buzzer will sound and the digital display shows E1. Change cookware.
• Power tube overheating protection:
when the power tube is overheating, the induction cooker will close the input
power and the display shows E2 .
• Over or under- voltage protection:
when the voltage is over 265V-285V, the induction cooker will shut off the
input power and the digital display shows E3;
When the voltage is under 150V-170V, the induction cooker will close the
input power and the digital display shows E4. Check that the mains voltage
corresponds to that shown on the appliance (alternating current).
• Sensor detecting function:
when the sensor is open circuit, the cooker will continue working for one
minute and the digital display shows E5; when the sensor is short circuit, the
cooker will display E6 immediately. Contact the after-sale service.
• NTC abnormal protection:
when NTC value change is small for IH working 5min, the induction cooker will
shut off the input power and the display shows E7.

TEFAL IH2018 Specifications

General

Brand	TEFAL
Model	IH2018
Category	Cookers
Language	English