10
3
Cooking
19-20 When the colour corresponding to your
choice of cooking level appears, open the
appliance and remove your food.
21 Close the appliance. The control panel will
light up and set itself to ‘choice of program’
mode.
Comment: the security system will turn
off automatically if no program selection
is made.
Cooking more food
To cook a second batch of food, please pre-
heat the appliance again (see section 2.
" Preheating ", starting from point 9), even
if cooking the same type of food.
How to cook another batch of food:
Once your first batch of food has finished
cooking:
1. Make sure that the appliance is closed and
no remnants of food remain inside.
2. Select the correct cooking mode or
programme (this step is necessary even if
the cooking mode is the same as for the
foods you have just finished cooking).
3. Press the button “ OK ” to begin preheating.
While preheating, the light indicating the
level of cooking will blink purple.
4. Once preheating is complete, the appliance
will beep and the indicator light will stop
blinking purple.
5. The appliance is ready to use once
preheating is complete. Open the grill lid
and place the food inside the appliance.
Important:
- Please note that preheating is required for
each new quantity of food to be cooked.
19 20
21
To Next Page
Loading...
