7
1
Preparing
1 Remove all packaging materials, stickers and
accessories from the inside and the outside
of the appliance.
The colour sticker on the cooking level
indicator can be changed, according to the
language. You can replace it with the one on
the inside of the packaging.
2 Before using for the rst time, thoroughly
clean the plates with warm water and a little
dishwashing liquid, rinse and dry thoroughly.
3-4
Position the removable drip tray at the front
of the appliance.
1 2
OK
3 4
2 Pre-heating
5 For the best results you may wipe the
cooking plates using a paper towel dipped
in a little cooking oil, to improve the non-stick
release.
6 Remove any surplus oil using a clean kitchen
paper towel.
7 Make sure that the upper and lower plates
are correctly positioned in the product.
Do not activate pre-heating without the
plates. Plug your appliance into the mains
power supply. (Note that the cord should be
completely extended).
8 Press the switch.
Caution : Make sure there are no food
between the plates
5 6
7 8
8 / 230
To Next Page
Loading...
Need help?
General