10
3
Cooking
19-20
When the colour corresponding
to your choice of cooking level appears,
open the appliance and remove your
food.
21
Close the appliance. The control panel
will light up and set itself to ‘choice of
program’ mode.
Comment:
the security system will
turn off automatically if no program
selection is made.
19 20
21
Cooking more food
To cook a second batch of food, please pre-heat the appliance
again (see section 2. “Pre-heating”, starting from point 9) even
if cooking the same type of food.
How to cook another batch of food:
After finishing your first batch of food:
1. Make sure the appliance is closed with no food inside.
2. Select the appropriate cooking mode/program (this step is
necessary even if the cooking mode is the same as for the
foods you have just finished cooking).
3. Press the “
OK
” button: the appliance starts pre-heating.
The pre-heating is symbolized by the cooking level
indicator that flashes purple.
4. The pre-heating is complete when an audible beep is
heard and the cooking level indicator stops flashing purple.
5. After the pre-heating, the appliance is ready for use. Open
the grill and place the food inside the appliance.
Important:
- Please note that with any new batch of food, the pre-
heating phase is mandatory.
To Next Page
Loading...
Need help?
General
