18
EN
TECHNICAL TROUBLESHOOTING GUIDE
Malfunction
description
Causes Solutions
Clock indicator off.
Problem of the connection
with the battery or battery
out of power capacity.
Send to authorized service
center for repair.
Any indicator lamp
off and no heating.
Rice cooker not plugged.
Verify the main plug is well
engaged in the product body.
Any indicator lamp
off and heating.
Problem of the connection
of the indicator lamp or
indicator lamp is damaged.
Send to authorized service
center for repair.
Steam leakage
during using.
Lid is badly closed. Open and close again the lid.
Micro pressure valve
not well positioned or
uncomplete.
Stop the cooking (unplug the
product) and check the valve
is complete (2parts locked
together) and well positioned.
Lid or micro pressure valve
gasket is damaged.
Send to authorized service
center for repair.
Cleaning the micro pressure valve
• When clean the micro-pressure valve, please remove it from the lid –
fig.15 and open it by rotating in the direction of “open” – fig.16a and
16b. After cleaning it, please wipe dry it and meet the two triangle in
the two parts together and rotate it in the direction of “close”, then put
it back to the lid of the rice cooker – fig.17a and 17b.
Cleaning and care of the other parts of the appliance
• Clean the outside of the Rice Cooker – fig.18, the inside of the lid and
the cord with a damp cloth and wipe dry. Do not use abrasive products.
• Do not use water to clean the interior of the appliance body as it could
damage the heat sensor.
To Next Page
Loading...
