21
1 Setting
1 Remove all packaging materials, stickers and
accessories from the inside and the outside of
the appliance.
2 Before using for the first time, thoroughly
clean the plates with warm water and a little
dishwashing liquid, rinse and dry thoroughly.
3-4 Position the removable drip tray at the front
of the appliance and push it completely until
“clip”
- Position the up and bottom plates until “clip”
1 2
OK
3 4
2 Preparation
5 For the best results you may wipe the cook-
ing plates using a paper towel dipped in a
little cooking oil, to improve the non-stick
release.
5bis Ensure that the bottom cooking plate and
the upper cooking plate are correctly posi-
tioned in the product before the pre-heating
phase begins.
6 Remove any surplus oil using a clean kitchen
paper towel.
7 Connect the appliance to an outlet. (note the
cord should be fully unwound).
8 Press the On/O button.
5 6
7 8
PREPARING THE APPLIANCE
To Next Page
Loading...
