Descaling the steam chamber (once per month)
Allow your iron to heat up with a full water tank while on its heel rest and with the thermostat control set to
normal.
Once the indicator light turns off, unplug the iron and place it over a sink.
Remove the anti-calc valve.
Shake the iron gently in a horizontal position over the sink until some of the water (containing the impurities)
leaks from the soleplate. You may push the turbo steam trigger to help flush out the minerals.
To finish the process, replace the anti-calc valve, pushing it until you hear a click.
Plug in your iron for 2 minutes on the heel rest to dry the soleplate.
To Next Page
Loading...
