2
Do not
immerse the water
tank in water when
cleaning.
Keep away from
any objects which
could be damaged by
the steam.
The turbo ring
must always be in
place before filling the
tank with water.
You must set
the clock before
programming.
Preparation
Prior to use
• Using warm soapy water, wash all the
removable parts and the inside of the
water tank.
• Rinse and dry.
Preparing the steam
cooker
• Place the cooker on a stable surface.
• Place the turbo ring around the heating
element, in the direction indicated in the
diagram.
Appliances fitted with an
electronic programmer
To set the clock
• Switch the appliance on. For 30 seconds,
the display flashes alternately (“Hr” and
“00:00”). Set the time you want with the
-/+ buttons.
• If the display no longer flashes or to
reset the time, press simultaneously on
the 0/I and PROG touch pads, then set
the time you want with the -/+ buttons.
• To confirm the time, press the
“VITAMIN+” touch pad or wait for auto-
matic save after 30 seconds.
• Disconnect the appliance.
3529-5066184 ME VITAMIN M6 22/10/03 10:46 Page 2
To Next Page
Loading...
