Tegam 1830A - List of Items Furnished; List of Additional Items Required for Operation and Maintenance; Tools and Test Equipment

10 TEGAM WAY • GENEVA, OHIO 44041 440-466-6100 • FAX 440-466-6110 • www.tegam.com
1-4
Section I – Introduction
List of Items Furnished
Item
Power Cord
User/Maintenance Manual
Statement of Calibration
Table 1.2 - 1830A Packing List
List of Additional Items Required For Operation and Maintenance
Accessory
Part Number
Heater Cable (4 pin mini, 48” or 15”)
Heater Cable (4 pin large, 48”)
Sensor Cable (478A & 8478B, 48”)
Sensor Cable (1830A/Legacy Mounts. 48” or 15”)
Sensor Cable (1830A/PM Series Mounts, 48” or 15”)
Universal Cable (Un-terminated, 48”)
Calibration Cable (Lug-terminated, 48”)
USB Cable 2 meter (USB A – USB A)
Rack Mount Kit (Single Unit)
Rack Mount Kit (Dual Unit)
CA-11-48/CA-11-15
CA-10-48
CA-6-48
CA-7-48/CA-7-15
CA-21-48/CA-21-15
CA-9-48
CA-20-48
CA-14-2M
1830-910
1830-911
Table 1.3 - 1830A Accessory List
Tools and Test Equipment
No special tools and test equipment are needed to operate the 1830A. The follow is a list of
thermistor mounts that will operate with the 1830A RF Power Meter.
HP/Agilent
478A, 8478B, S486A, G486A, J486A, H486A,
X486A, M486A, P486A, K486A, R486A
TEGAM/Weinschel
1107-7, 1107-8, 1807A, M1110, M1111,
M1118, M1120, M1125, M1130, M1135,
F1109, F1116, F1117, F1119, F1125, F1130,
F1135
Table 1.4 - 1830A Compatible Thermistor Mounts