Teka DW7 57 FI - Introduction to Service Manual; Control Panel Overview; Control Panel Layout and Indicators; Service Test Guide

Service Manual
DW7 57 FI – DW7 41 FI – LPI 759
Service Manual: MSDW15070 - 1 -
1. Introduction
This document explains how to perform the Service Test for the related Dishwasher.
2. Control Panel
1.ON/OFF button
5.Salt and rinse aid warning light
2.Power on light
6.Program button
3.Delayed start button
7.Program indicator light
4.Display
3. Service Test
To activate test program, with the door opened and machine off, hold down the
Program button and press the POWER button until the machine enter into Test
Program. The appliance will pause and stand by(as step 00). Then close the door to
start the Test Program.
During test program running you can press Program button to jump into next step
(except inlet valve step).
No.
Proceso
Display
Estado
0
Initialization
88
Power on, stand by
1
Inlet valve
0A
Open inlet valve and feeds with 3.6L wáter (3.0L
in 45 cm models)
2
Washing pump
and dispenser
09
Dispenser will act once and washing pump will
run for 60 sec. in this step
3
Heating element
08
Run washing pump and heating element until the
water temperatura reaches 57ºC. Then the
machine will pause
Press Program button to jump into the next
step
4
Drain pump
07
Drain for 30 sec.