13
ENGLISH
Setting the End Cooking Time
1 Press or until symbol lights up.
Press .
2 Select the time you wish the cooking
process to finish at by pressing or .
3 The clock beeps twice, the current time is
displayed and symbol lights up perma-
nently to indicate that the oven will turn
itself off automatically.
4 Select a cooking function and temperature.
5 When the set time is reached, the oven
turns itself off, the alarm sounds and sym-
bol flashes.
6 Press any button to stop the alarm and turn
the oven back on again.
7 Set the controls to to turn the oven off.
You can consult the end cooking time at any
moment by pressing or until symbol
flashes and then pressing . You can
also modify the end cooking time at this point
by pressing or . The clock beeps twice
to confirm the change.
This function can be used even when you are
already using the oven. To do this, follow the
instructions indicated above except point
number 4.
Setting the Cooking Time and the End
Cooking Time
1 Press or until symbol lights
up. Press .
2 Select the period of time you wish to cook
for by pressing or .
3 The clock beeps twice, the current time is
displayed and symbol lights up per-
manently.
4 Press or until symbol lights
up. Press .
5 Select the time you wish the cooking
process to finish at by pressing or .
6 The clock beeps twice, the current time
is displayed and symbol lights up
permanently.
7 Select a cooking function and tempera-
ture.
8 The oven remains off with symbols
and lit up. Your oven is set.
9 When the time to start cooking is
reached, the oven starts up and cooks
for the set period of time.
10 When the set end cooking time is
reached, the oven turns itself off, the
alarm sounds and symbols and
flash.
11 Press any button to stop the alarm and
turn the oven back on again.
12 Set the controls to to turn the oven
off.
You can modify the end cooking time by press-
ing or until symbol lights up and
then pressing . You can now modify the
end cooking time by pressing or . The
clock beeps twice to confirm the change.
Important
In the event of a power cut, all the electron-
ic clock settings are deleted and the indica-
tion 00:00 flashes on the display. It is nec-
essary to set the time and programme the
clock again.
To Previous Page
Loading...
