29
ENGLISH
INCIDENT CAUSE SOLUTION
The control dial is in position
and the door is still locked.
The oven has not cooled down
to the safe temperature.
Wait until the temperature
lowers and pilot light turns
off.
The control dial is in position
, the oven is cold and the
door is still locked.
You have not followed the
instructions to cancel the
operation correctly.
1. Turn the control dial to
position and wait for 1
minute.
2. Turn the control dial to
position and wait for 1
minute.
3. Turn the control dial to
position again and wait
until pilot light turns off.
I have turned the control dial to
position . The pilot light
is lit up, the symbol is
flashing on the timer display
and there is a beep every 5
seconds.
You have not selected one of
the programmes (P1, P2 or P3).
Press or to choose one
of the programmes (P1, P2 or
P3) to start the pyrolytic cycle.
To Next Page
Loading...
