Teka RBF 78720 - Service Test Mode; Entering Service Test; Service Test Functions and Indicators

Service Manual
RBF 78720/78630/74620
Service Manual: MSFR19010 EN - 5 -
5. Service test
To enter de Service test, these steps must be followed:
- Press and keep pressed the Freezer Set sensor while open and close the
refrigerator’s door 3 times. After 3 seconds, the Service test is launched.
- If a component fails, an error message will be displayed in this moment.
Otherwise, nothing is displayed.
- While in Service test mode, there is a “beep” every 5 seconds.
- The Child lock LED will blink.
- The different functions can be accessed pressing the sensor “M”, according to the
table below.
Funciones modo servicio
TOUCHING M (MODE)
BUTTON ONCE
Starting mode:
- Eco icon blinks.
- The number of components which is controlled is shown at freezer
segments of display.
- Eco icon goes off when the starting test finishes and then display
returns to initial service mode..
TOUCHING M (MODE)
BUTTON TWICE
Manual Defrost:
-Holiday icon blinks.
-Defrost might be finished manually or automatically.
-Defrost might be finished manually by using the cooling set button.
Holiday icon goes off and display returns to initial service mode.
-Automatic defrost operates according to the standard defrost time.
-Holiday icon goes off when he when the manual defrost ends and
display returns to initial service mode.
TOUCHING M (MODE)
BUTTON 3 TIMES
Motor Damper control mode (only models with damper):
-Fast Cooling icon blinks.
-There is no function due to not having damper component in the
product.
-SC icons goes off and display returns to initial service mode.
TOUCHING M (MODE)
BUTTON 4 TIMES
Current temperature values indicator:
-Fast freezing icon blinks.
-Pressing the Freezer set sensor, current values will be displayed:
1 – Refrigerator’s sensor.
2 – Freezer’s sensor.
3 – Defrosting sensor.
4 – Ambient sensor (not available in these models)
5 – Refrigerator’s defrosting sensor
-Touching cooler set icon, function will be finished manually.
-Fast freezeng icon goes off and display returns to initial service
mode.
TOUCHING M (MODE)
BUTTON 5 TIME
Door switch control:
-No icons at display.
-Cooler set segment gives information about cooler door.
-Mode just could be deactivated by cooler set button.