Functioning Time
Desired functioning time is selected by rotating the Timer Button (5).
For periods shorter than 2 minutes adjust the timer to a higher position and then back to the required
time.
Whenever the timer is in a position other than zero then the oven light should switch on.
When the time is up, the timer will emit a sound signal and oven will automatically be switched off.
While Working ...
The oven door may be opened at any time while in use:
- THE PRODUCTION OF MICROWAVES IS IMMEDIATELY INTERRUPTED;
- The grill will be switched off, however, remaining very hot;
- The timer will stop automatically, indicating the time left.
You may then, if you wish:
- Stir or turn the food, to improve even heating;
- Select another function by setting the Function Selector (3) on another position;
- Change the remaining functioning time by turning the Timer Button (5).
Close the door again and press the Start Button (6) in the models with this button. The oven will start
working.
CAUTION: at the end of the cooking process turn the Timer Button (5) to zero, otherwise the oven will
start when the door is closed.
Note:
1. To stop the oven before the programmed time, rotate the Timer Button (5) to zero or open the door.
2. While the oven is working, you may change the timer, the power level or the function, by rotating the
respective buttons.
To Next Page
Loading...
Need help?
General
