TEKMAGIC W64 - Alarm Settings; Set Alarm Time; Save Alarm Setting; Exit Alarm Setting Mode

Notes:
1. The stopwatch timing range is 0'00"00 to 23:59'59".
2. If you don't stop the timing, the stopwatch will continue to timing and start timing from 0'0''00
even the timing is over 24 hours and you have exited the stopwatch mode.
IV. Alarm
4.1 Set an alarm
4.1.1 In the local time display mode, press the MODE button once to enter into alarm setting mode.
4.1.2 Hold down the RESET button till you see the hour digit is blinking, then press the START button
to set the hour.
4.1.3 Press the MODE button once, you will see the minute digit starts blinking, then press the
START button to set the minute.
4.1.4 Press the RESET button once to save the setting.
4.1.5 Press the MODE button once to exit the alarm setting mode.