EasyManua.ls Logo

Teknetics Eurotek Pro 11DD - User Manual

Teknetics Eurotek Pro 11DD
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
OWNER’S MANUAL
METPRO 021313
Use a 9-volt ALKALINE battery only.
Do not use “Heavy Duty” batteries.
Do not use ordinary Zinc Carbon batteries.
Model #:
EUROTEKPRO-11DD
comes standard with
the 11” Biaxial DD
searchcoil
5-YEAR LIMITED WARRANTY
The Eurotek
®
Pro metal detector is warranted against defects in materials and
workmanship under normal use for five years from the date of purchase to the
original owner.
Damage due to neglect, accidental damage or misuse of this product is not
covered under this warranty. Decisions regarding abuse or misuse of the detector
are made solely at the discretion of the manufacturer.
Proof of Purchase is required to make a claim under this warranty.
Liability under this Warranty is limited to replacing or repairing, at our option, the
metal detector returned, shipping cost prepaid, to First Texas Products. Shipping
cost to First Texas Products is the responsibility of the consumer.
To return your detector for service, please first contact First Texas Products for a
Return Authorization (RA) Number. Reference the RA number on your package and
return the detector within 15 days of calling to:
First Texas Products L.L.C.
1465-H Henry Brennan Dr.
El Paso, TX 79936
Phone: 915-633-8354
NOTICE TO CUSTOMERS OUTSIDE THE U.S.A.
This warranty may vary in other countries; check with your distributor for details.
Warranty does not cover shipping costs to and from the U.S.A.
According to FCC part 15.21, changes or modifications made to this device not expressly approved by
the party responsible for compliance could void the user’s authority to operate this equipment.
This device complies with FCC Part 15 Subpart B Section 15.109 Class B.
Copyright
©
2013 by First Texas Products, L.L.C.
All rights reserved, including the right to reproduce this book, or parts thereof, in any form,
except for the inclusion of brief quotations in a review.
Published by First Texas Products, L.L.C.
Operational Weight: 1.077 kg (2lbs 6oz), with 11DD coil: 1.19 kg (2lbs 10oz)
1465-H Henry Brennan • El Paso, TX 79936 • (915) 633-8354
www.tekneticst2.com
®
TREASURE HUNTER’S CODE OF ETHICS:
• Always check Federal, State, County and local laws before searching.
• Respect private property and do not enter private property without the owners permission.
• Take care to refill all holes and leave no damage.
• Remove and dispose of any and all trash and litter found.
• Appreciate and protect our inheritance of natural resources, wildlife and private property.
Act as an ambassador for all treasure hunters; use thoughtfulness, consideration and courtesy at all times.
• Never destroy historical or archaeological treasures.
• All treasure hunters may be judged by the example you set; always conduct yourself with
courtesy and consideration of others.

Questions and Answers

Summary

Terminology Definitions

Discrimination and Elimination Concepts

Defines how the detector differentiates and ignores metal types.

Target Identification and Pinpointing

Explains terms for identifying targets and locating them precisely.

Ground Balancing and Audio Feedback

Covers ignoring ground minerals and V.C.O. audio for target interpretation.

Pre-Assembly Guide

Detector Components Identification

Lists and identifies the parts included with the detector for assembly.

Required Tools and Initial Assembly

Details the tools needed and initial assembly instructions.

Detector Assembly Process

Connecting S-Rod and Stems

Instructions for assembling the S-Rod, middle, and lower stems.

Attaching Searchcoil and Cable

Steps for connecting the searchcoil and winding the cable.

Adjusting Lower Stem Length

Guidance on setting the lower stem for comfortable use.

Battery Installation and Management

Battery Type and Compartment

Specifies required battery type and location of the battery compartment.

Battery Life and Indicator

Information on expected battery life and display indicators.

Optional Arm Strap Accessory

Details about the optional arm strap accessory for secure use.

Quick-Start Demonstration

Supplies and Detector Setup

Lists necessary items and initial placement for the demonstration.

Target Identification Practice

Demonstrates detecting and identifying various metal objects.

Discrimination and Pinpoint Testing

Guides through testing discrimination and pinpoint functions.

Fundamentals of Metal Detecting

Ground Minerals and Trash Handling

Explains interference from ground minerals and ignoring unwanted items.

Target Identification and Depth Estimation

Details how the detector identifies objects and estimates their depth.

Electromagnetic Interference (EMI)

Sensitivity Control for EMI Mitigation

How sensitivity adjustments mitigate electromagnetic interference.

Headphone Jack and Usage

Connecting and Utilizing Headphones

Information on the headphone jack and benefits of headphone use.

Detector Operation and Controls

Powering Up the Detector

Steps to turn on the metal detector and its initial mode.

Understanding Control Buttons

Explains the function of key buttons like MENU, PINPOINT, and +/-.

Menu Selections Overview

Menu Navigation and Settings

How to navigate the menu system using buttons.

Sensitivity (SENS) Adjustment

Details on adjusting the sensitivity setting for optimal performance.

Menu Selections (Continued)

Discrimination (DISC) Adjustment

How to adjust the discrimination setting and its ranges.

Menu Selections (Continued)

Volume (VOL) Adjustment

How to adjust speaker volume and understand volume settings.

Discrimination System Details

Target Detection and Motion Requirement

Correct sweep technique for target detection and motion necessity.

Target-ID Number Interpretation

Understanding the 2-digit Target-ID and its variability.

Discrimination System Features

Target-ID Ranges and Reference

General ranges for Target-IDs and reference to common metal items.

Understanding the 3-Tone System

Explains low tone, V.C.O., and high tone audio feedback.

Discrimination System Operation

Default DISC Setting and Target Elimination

How the default DISC setting affects target detection.

Variable Tone Breakpoint Functionality

Explains how DISC setting changes tones above certain IDs.

Disc Control and Tone Breakpoint Illustration

Discrimination Elimination Examples

Illustrates how DISC settings eliminate targets and change tones.

Depth Indicator and Coin Reference

Bar Graph Depth Indicator

How the bar graph represents object depth and size.

Target-ID Coin Reference Table

Provides known Target-IDs for common coin references.

Mode Selections: Iron Identification

Variable Iron Identification

How the detector classifies ferrous objects by size and signal strength.

Iron-Indicator Functionality

Details the IRON icon's function and its independence from discrimination.

Mode Selections: Pinpoint Operation

Entering and Using Pinpoint Mode

How to activate Pinpoint Mode and its detection characteristics.

Pinpoint Mode Usage

Pinpoint Depth Indicator

How the 2-digit number displays target depth in Pinpoint Mode.

Pinpoint Retuning and Narrowing Down

Techniques for retuning and precisely locating targets.

Consider Purchasing a Pinpointer

Recommendation for handheld pinpointers to aid in recovery.

Other Detector Features

Overload Warning System

Explains the overload warning and how to resolve it.

Unit of Measure (U;M) Settings

How to change the depth indicator between CM and IN.

Memory and Reset Functions

How to save settings to memory and reset to factory defaults.

Troubleshooting Guide

Detector Chatter and Erratic Beeps

Causes and solutions for detector chattering or erratic beeping.

Low Tone and No Power Issues

Troubleshooting constant low tones, no sounds, or LCD issues.

Available Accessories

Carrying Bags and Pouches

Details on padded carrying bags and camo pouches.

Headphones and Pinpointers

Information on stereo headphones and pinpointer accessories.

Digging Tools and Apparel

Details on digging trowels, gold picks, knives, and apparel.

Replacement Searchcoils

List of replacement searchcoils and their protective covers.

Treasure Hunters Code of Ethics

Ethical Searching Guidelines

Principles for responsible and legal metal detecting practices.

5-Year Limited Warranty

Warranty Coverage and Limitations

Details on warranty coverage, exclusions, and proof of purchase.

Service and Return Procedures

Instructions for returning the detector for service or repair.

Teknetics Eurotek Pro 11DD Specifications

General IconGeneral
BrandTeknetics
ModelEurotek Pro 11DD
CategoryMetal Detector
LanguageEnglish

Related product manuals