Teknion Amicus - User Manual

SEAT HEIGHT ADJUSTMENT SEAT DEPTH ADJUSTMENT
LUMBAR HEIGHT ADJUSTMENT BACK TILT LOCK ADJUSTMENT
TILT TENSION ADJUSTMENT ARM WIDTH ADJUSTMENT
To adjust the angle of reclination,
pull the lever up to unlock the back
and leave the chair in free-flow
mode. Recline to the desired
position and push the lever down
to lock the back in place.
To adjust the lumbar height, grasp
both levers and slide them up or down
to the desired position. Not available
on Amicus General Use Chairs.
To adjust the seat depth, push the
lever down and simultaneously lift
your weight from the seat while
sliding the seat forward or
backward. Release the lever to lock
the seat in place. Not available on
Amicus General Use Chairs.
To raise the chair, lift the lever up
while lifting your weight from the
seat until you reach the desired level,
then release to lock in place. To
lower the chair, lift the lever up and
allow your weight to push the seat
down until you reach the desired
level, then release to lock in place.
Leaning back, determine if the
resistance of the chair is
comfortable. For less resistance, pull
tension adjustment lever out and
turn it counterclockwise. For greater
resistance, turn the lever clockwise.
To adjust the width of each arm,
push the lever down to release the
arm lock. Slide the arm inward or
outward to the desired position.
Push the lever up to lock the arm
in place.
amicus adjustment features & instructions

Summary

Seat Adjustments

Seat Height Adjustment

Instructions for raising and lowering the chair seat to the desired level.

Seat Depth Adjustment

Instructions for adjusting seat depth by sliding the seat forward or backward.

Back Adjustments

Lumbar Height Adjustment

Instructions for sliding levers up or down to adjust lumbar support height.

Back Tilt Lock Adjustment

Instructions for locking and unlocking the back tilt for reclination.

Other Adjustments

Tilt Tension Adjustment

Instructions for adjusting tilt resistance using a lever.

Arm Width Adjustment

Instructions for adjusting armrest width by sliding them inward or outward.

Armrest Adjustments

2 D Arm Height Adjustment

Instructions for adjusting arm height using a button under the arm cap.

3 D Arm Adjustment

Instructions for adjusting arm height by pressing a button on the arm.

3 D Arm Pivot Adjustment

Instructions for pivoting the arm cap inward or outward.

Important Warnings

Safety Precautions

Guidelines to prevent injury, including weight limits, inspection, and proper use.

Teknion Amicus Specifications

General

Category	Indoor Furnishing
Product Name	Amicus
Manufacturer	Teknion
Product Type	Office Chair
Type	Office Chair
Weight Capacity	300 lbs
Warranty	12 year warranty